Related Topics:
Facility ID: 84104DLTFB1235S
Facility Name and Address: MIDWESTERN FABRICATORS INC 1235 S PIONEER RD SALT LAKE CITY, UT 84104 Parent Company: Industry: All Other Plastics Product Manufacturing (326199) Chemical: Styrene Reports: View TRI Facility profile report for this facility View TRI Form R submissions by this facility |
|
*You can navigate within the map with your mouse. |
Production Related Waste Management for Selected Chemical
lchemid=0000100425
Chart Options1: |
Waste Management Comparison -
Display facility comparison report for this industry and chemical
Pollution Prevention Activities for Selected Chemical
Reporting Year | Section 8.10: Newly Implemented Source Reduction Activity | Section 8.10: Methods to Identify Activity | Section 8.11: Optional Pollution Prevention Information* |
---|---|---|---|
2022 |
Barriers: B6-Barriers to P2 B6 - Pollution prevention previously implemented - additional reduction does not appear technically or economically feas
Barriers: B3-Barriers to P2 B3 - Concern that product quality may decline as a result of source reduction. Barriers: B7-Barriers to P2 B7 - No known substitutes or alternative technologies. |
Barriers to P2: B6 - Pollution prevention previously implemented - additional reduction does not appear technically or economically feas - attempted to use vacuum bag technology to prevent emissions. The size and type of parts manufactured are not suitable for vacuum bagging. Barriers to P2: B7 - No known substitutes or alternative technologies. - All alternatives explored are limited by the type and size of products produced. Barriers to P2: B3 - Concern that product quality may decline as a result of source reduction. - Low styrene resin and gel coat is limited by the ability to make the final product and corrosion resistance. The products manufactured are for the corrosion industry and require maximum corrosion resistance and quality of laminate. |
|
2021 |
Barriers: B6-Barriers to P2 B6 - Pollution prevention previously implemented - additional reduction does not appear technically or economically feas
|
Barriers to P2: B6 - Pollution prevention previously implemented - additional reduction does not appear technically or economically feas - All spray equipment has been updated to low pressure, non-atomizing application equipment |
|
2020 |
Barriers: B7-Barriers to P2 B7 - No known substitutes or alternative technologies.
|
Barriers to P2: B7 - No known substitutes or alternative technologies. - The physical properties of the end product require the use of specific products for the correct corrosion resistance. |
|
2018 |
Barriers: B7-Barriers to P2 B7 - No known substitutes or alternative technologies.
|
Barriers to P2: B7 - No known substitutes or alternative technologies. - Open molding with non-atomizing equipment is the most current technology. Source Reduction: Source Reduction - use of low styrene resins and gel coats has reduced emissions during fabrication. |
|
2016 |
Barriers: B6-Barriers to P2 B6 - Pollution prevention previously implemented - additional reduction does not appear technically or economically feas
|
Barriers to P2: B6 - Pollution prevention previously implemented - additional reduction does not appear technically or economically feas - Facility is state-of-the-art, using lowest feasible content raw materials |