Facility ID: 1290WCMSMN1MART
Facility Name and Address: CAMSO MANUFACTURING USA LTD 1 MARTINA CIR PLATTSBURGH, NY 12901 Parent Company: MICHELIN NORTH AMERICA INC Industry: All Other Transportation Equipment Manufacturing (336999) Chemical: Zinc compounds |
|
Reporting Year | Section 8.10: Newly Implemented Source Reduction Activity | Section 8.10: Methods to Identify Activity | Section 8.11: Optional Pollution Prevention Information* |
---|---|---|---|
2022 |
Source Reduction:: S21: Optimized process conditions to increase efficiency
|
Methods to Identify SR Opportunities: T11: Other
|
S21: Compression molding flashing reduction. Source Reduction - The zinc oxide is used as an anti stick coating on our raw rubber supply, in lieu of plastic sheeting that would result in more waste. |
2019 |
Other Environmental Practices: Recycling - We recycle the punch outs from the tracks, under a BUD(Beneficial Use Determination) from the NYSDEC. It is used as a drainage item in burying of leachate lines. Source Reduction: Source Reduction - The zinc oxide is used as an anti stick coating on our raw rubber supply, in lieu of plastic sheeting that would result in more waste. |
||
2018 |
Barriers: B3-Barriers to P2 B3 - Concern that product quality may decline as a result of source reduction.
|
Other Environmental Practices: Recycling - We recycle the punch outs from the track, under a Beneficial Use Determination from the NYSDEC. It is used as a drainage item in the county landfill. Barriers to P2: B3 - Concern that product quality may decline as a result of source reduction. - The zinc oxide is used as an anti stick coating on our raw rubber supply, in lieu of a plastic sheet that would result in more waste. |
The Waste Management Hierarchy |
The waste management hierarchy established by the Pollution Prevention Act (PPA) guides waste generators toward the best options for managing wastes.
The preferred option is to prevent pollution at its source, but for waste that is generated, the preferred management methods are recycling, followed
by burning for energy recovery, treatment and, as a last resort, disposing of the waste.
|