|Data Source: Preliminary 2021 Dataset (released September 2022)||See Note||Instructions for printing wide reports|
TRI Transfers Off-site for Further Waste Management (in pounds), by Afton Chemical Additives Corp (TRI ID 77641THYLDSAVAN) for Xylene (mixed isomers) chemical, for All counties, U.S., 1996-1997
Are year to year changes comparable?
|Row #||Year||Transfers to Recycling||Transfers to Energy Recovery||Transfers to Treatment||POTW Transfers - Other Releases||POTW Transfers - Treatment||Other Off-site Transfers||Transfers Off-Site for Disposal or Other Releases||Total Transfers Off-site for Further Waste Management|
Back to top
View other report type:
On- and Off-site Releases
Quantities of TRI Chemicals in Waste (waste management)
Note: Reporting year (RY) 2021 is the most recent TRI data available. Facilities reporting to TRI were required to submit their data to EPA by July 1 for the previous calendar year's activities. TRI Explorer is using an updated data set (released to the public in September 2022). This dataset includes revisions for the years 1988 to 2021 processed by EPA, after the National Analysis Dataset was released. Revisions submitted to EPA after this time are not reflected in TRI Explorer reports. TRI data may also be obtained through EPA Envirofacts.
Users of TRI information should be aware that TRI data reflect releases and other waste management activities of chemicals, not whether (or to what degree) the public has been exposed to those chemicals. TRI data, in conjunction with other information, can be used as a starting point in evaluating exposures that may result from releases and other waste management activities which involve toxic chemicals. The determination of potential risk depends upon many factors, including the toxicity of the chemical, the fate of the chemical, and the amount and duration of human or other exposure to the chemical after it is released.
Transfers to Recycling are Section 6.2, sum of Solvents/Organics Recovery (M20), Metals Recovery (M24), Other Reuse or Recovery (M26), Acid Regeneration (M28) and Transfer to Waste Broker - Recycling (M93)). Transfers to Energy Recovery are Section 6.2, sum of Energy Recovery (M56) and Transfer to Waste Broker - Energy Recovery (M92)). Transfers to Treatment are Section 6.2, sum of Solidification/Stabilization (M40, except for metals and metal compounds), Incineration/Thermal Treatment (M50), Incineration/Insignificant Fuel Value (M54), Wastewater Treatment (excluding POTWs) (M61, except for metals and metal compounds), Other Waste Treatment (M69) and Transfer to Waste Broker - Waste Treatment (M95)). Transfers to POTWs (non-metals) are Section 6.1 (except metals and metal compounds). Transfers to POTWs (metals and metal compounds) are Section 6.1 (metals and metal compounds only). Other off-site transfers are Section 6.2 sum of amounts with no code or invalid code.
Transfers off-site to disposal or other releases not including transfers to POTWS of metals and metal compounds are Section 6.2, sum of Class I Underground Injection Wells (M81), Class II-V Underground Injection Wells (M82,M71), RCRA Subtitle C Landfills (M65), Other Landfills (M64), Storage Only (M10), Solidification/Stabilization - Metals and Metal Compounds only (M41), Solidification/Stabilization (M40 metals and metal compounds only), Wastewater Treatment (excluding POTWs) - Metals and Metal Compounds only (M62), Wastewater Treatment (excluding POTWs) (M61 metals and metal compounds only), RCRA Subtitle C Surface Impoundments (M66), Other Surface Impoundments (M67, M63), Land Treatment (M73), Other Land Disposal (M79), Other Off-site Management (M90), Transfers to Waste Broker - Disposal (M94 or M91), and Unknown (M99).
Quantities of waste data are from Section 8 of the Form R, which is the standard TRI reporting form. These data are available beginning with the 1991 reporting year.
A decimal point, or "." denotes the following: if a decimal point is reported across an entire row, the facility submitted a Form A (i.e., the facility certified that its total annual reportable amount is less than 500 pounds, and does not manufacture, process, or otherwise use more than 1 million pounds); or if a decimal point is reported in a single column, the facility left that particular cell blank in its Form R submission (a zero in a cell denotes either that the facility reported "0" or "NA" in its Form R submission).How to cite TRI Explorer. Following APA Style, 6th edition, an appropriate citation to TRI Explorer is:
United States Environmental Protection Agency. (2022). TRI Explorer (Preliminary 2021 Dataset (released September 2022)) [Internet database]. Retrieved from https://enviro.epa.gov/triexplorer/, (October 04, 2022).
Go to TRI Explorer Home |